USB-CTR-15 Counter/Timer Module
sub
Features
- High-Speed USB 2.0 device, USB 3.0 compatible
- Fifteen independent 16-bit counter/timers (5 x 82C54-10)
- Clock, gate and out signals from all 15 channels buffered and accessed via 1 connector
- Supports input frequencies up to 10MHz
- Standard configuration adapter pre-configured for event counting, frequency measurement, pulse width measurement, or frequency generation
- Removable screw-terminal board for easy wiring
- User wiring adapter card provided for flexible yet easy counter concatenation/configuration
- PC/104 module size (3.550″ by 3.775″) and mounting compatibility
- Rugged small-sized (4″ x 4″ x 1.25″) steel enclosure
- Type B USB connector features industrial strength and high-retention design
$299.00
In StockDescription
USB Digital Counter/Timer Module
The USB-CTR-15 is an ideal solution for adding portable, easy-to-install, counter/timer capabilities to any PC or embedded system with a USB port. This board is packaged in a small, rugged, industrial enclosure and features 15 independent 16-bit counter/timers. The unit is a true USB 2.0 device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is plug-and-play allowing quick connect/disconnect whenever you need additional counter/timer devices on your USB port. The USB-CTR-15 can be used for a wide variety of measurement applications including event counting, frequency measurements, position measurement, pulse counting, pulse-width modulation and pulse generation. The OEM version provides just the board without the enclosure or external screw terminal board and is ideal for a variety of embedded OEM applications.
The USB-CTR-15 features five fully-undedicated industry standard 82C54 counter/timer chips. Each 82C54 provides three independent software programmable 16-bit counters. The maximum allowable input frequency is 10 MHz. I/O wiring connections are provided via an industry standard 50-pin IDC connector or via a removable screw terminal adapter board. A User Configuration Adapter board is also provided to assist in wiring the counters together. This allows for flexible yet easy counter concatenation/configuration.
The USB-CTR-15 is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board measures just 3.550 by 3.775 inches and ships inside a steel powder-coated enclosure with an anti-skid bottom.
OEM USB/104 FORM FACTOR
What makes the OEM option unique is that its PCB size and mounting holes match the PC/104 form factor (without the bus connections). This allows our rugged counter/timer board to be added to any PCI-104 or PC/104 stack by connecting it to a simple USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104 – especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. Future stacks will be using the extremely fast PCI Express bus which is essentially overkill for simple digital monitoring and control. The USB-CTR-15 OEM board can also be added into many pre-existing standard PC/104 based systems and enclosures. The OEM (board only) version is perfect for a variety of embedded applications. The board’s pre-drilled mounting holes allow for installation using standoffs inside most enclosures or systems.
High Retention USB Connector
The ever-growing presence of USB in the industrial/military marketplace has driven the need for USB connections to be reliable, dependable, and unfailing. Gone are the days of loose USB connections. A type B USB connector is used on all ACCES USB/104 products which features a high retention design that complies with the class 1, Div II minimum withdrawal requirement of over 3 pounds of force (15 Newtons). This connector has an orange color-coded insulator to quickly differentiate it from standard USB connectors. Using these USB connectors increases reliability in your system and ensures a tight connection. For embedded OEM type applications, an additional miniature USB input header is provided in parallel with the type B connector.
Applications
- Home
- Portable
- Laptop
- Education
- Laboratory
- Industrial Automation
- Embedded OEM
FACTORY OPTIONS
- Extended operating temperature (-40° to +85°C)
- External power components and AC/DC adapter
- Screw terminals for power input provide high retention connection
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
ACCESSORIES
The USB-CTR-15 is available with optional cable assemblies, screw termination boards, and an optional external AC/DC power supply.
Downloads
Data Sheets
Manuals
Software
- LabVIEW Software Packages
- Linux Software Packages
- USB-CTR-15 Software Package (34.27 MB -- Last Uploaded 2024-10-14)
Drivers and Downloads
Full list of available Downloads: Software Packages, Drivers, Manuals, and other documents
Information about our Free Software packages:
ACCES is proud to provide a full suite of software support with every Data Acquisition product. We are committed to supporting the most popular operating systems and platforms for our customers. Currently we are actively supporting 7 -> 11, both 32 & 64 bit, including “Server 2008,” “Embedded,” and “Compact” flavors for all plug-and-play products including PCI, PCI Express, USB, and more. Many products continue to ship with support for additional operating systems such as DOS, Windows 95, 98, Me, NT4, 2000, and XP.
Samples
Among the software we deliver with our products are sample programs in a wide variety of programming languages. These samples are used to demonstrate the software interfaces to our products — and many can be used as-is in your production environments, or to test functionality of the devices out-of-the-box. We’re currently actively supporting sample programs in Microsoft Visual C#, and Delphi, with many devices including samples in Visual Basic (5 and .NET), Visual C/C++, and Borland C/C++ 3.1 for DOS. Additionally we provide National Instruments LabVIEW compatible DLLs and many demonstration VIs for our devices.
Drivers
Drivers for various operating systems are also provided, including active support for Windows 7 -> 11 — all in both 32-bit and 64-bit flavors, and including consumer, server, and embedded varieties — as well as the 2.6 and newer Linux kernels and recent OSX / macOS versions. Many products continue to ship with driver support for Windows 95, 98, Me, NT4, Windows 2000, XP, and more, but support for these operating systems is considered deprecated.
Setup Programs and Utilities
Our Data Acquisition devices also include a graphical setup utility that walks you through the process of configuring any option jumpers or switches on the device, as well as explaining a little about the various connectors present.
Many devices also include utility programs – little tools to make your use of the device easier, such as EWriter, a program that allows you to read and write data in the user-accessible EEPROM locations on all our USB data acquisition products; or WinRISC, a “Really Incredibly Simple Communications” terminal program that lets you get started instantly with serial devices.
“Register Level” Documentation
Besides all this software in all these languages and operating systems ACCES has a policy of open and transparent development: none of our lowest-level “register” interfaces are hidden from you — we document every register in every bus card, every command in every serial board, and every usb control transfer in every USB Data Acquisition board. These lowest-level interfaces allow you to develop for our products in ANY operating system or language, regardless of our actively supporting it or having a driver for it. We have customers actively developing in ADA, Android, Python, Java, MATLAB, Solaris, and more, just by referring to our complete low-level interface documentation! And we provide the full source code to all of our drivers, regardless of operating system, to give you an even bigger head start in your own development tasks.
No Fees or Royalties
All of this software is provided at no additional charge, and is licensed under any of a variety of flexible — and royalty free — options. Check out our software license explanation if you’d like more information.
USB and Performance
Our USB Data Acquisition products use our “AIOUSB” driver package in Windows and Linux. This driver package includes 32-bit and 64-bit support, and consists of low-level driver components and a high-level API library. This custom interface driver enables our USB devices to achieve 4000 transactions per second, compared to the competitions’ “HID” drivers that cap out around 50 transactions per second. You can read all about the API in the USB Software Reference Manual linked below, and included in every applicable Software Package. (The Linux version of the AIOUSB API is almost identical to the Windows API, and is documented in the aiousb.html file included in the Linux software package.) Like all of our software, full source code is always provided.
Custom Software
ACCES also offers Custom Software Services for our products. Our prices are unbelievably low, often as inexpensive as free! If you need something tweaked to support your needs, or an entire enterprise application developed from scratch, it is definitely worth your time to inquire with us, first.
Further information about available ACCES Software:
Redistributing Windows Drivers
A list of ACCES drivers and the files that compose them under different versions of Windows, so you can easily redistribute ACCES cards and drivers.
Counter/Timers
- Type: 82C54-10 programmable interval counters
- Output Drive (TTL):
- 2.0 VDC min., source 32 mA
- 0.55 VDC max., sink 64 mA
- Maximum Input Frequency: 10MHz
- Input, Gate: CMOS compatible
- Clock: On-board, 10 MHz crystal-controlled clock
- Active Count Edge: Negative edge
- Minimum Clock Pulse Width: (input characteristic) 30 ns high, 40 ns low
- Minimum Divisor: divide-by-2
- Maximum Divisor: divide-by-65536 (16-bits, load value “0”)
- Timer Range: 16 bits
Bus Type
- USB2.0 high-speed (480 Mb/s)
- circa 4000 transactions per second
Power
- Basic unit: 60mA typical (no load); 12mA with max counter transitions
- +5 VDC from the USB bus or external power supply depending on user configuration
The USB bus is specified to provide 500 mA to most desktop environments. This gives you 440 mA available (500mA -60mA = 440mA). If using more than a total of 500mA, use optional 9 VDC (on board voltage regulator outputs +5 VDC to card) external power supply and remove VUSB jumper and place jumper on VEXT. Then plug in external power before plugging into USB port . This option will give you a total of 1000mA available.
- +5V resettable fuse at 0.5A located on connector
Environmental
- Operating Temperature Range: 0°C. to 70°C
- Storage Temperature Range: -40°C. to +85°C
- Humidity: 0 to 90% RH, non-condensing
- Board Dimension: 3.550 x 3.775 inches
- Box Dimension: 4.00 x 4.00 x 1.25 inches
Regulatory Compliance
This product is designed to be in full compliance with CE requirements.
| Model | Description | Price (USD) | |
|---|---|---|---|
| USB-CTR-15 | USB Digital Counter/Timer Module | $299.00 |
| Accessories | |
|---|---|
| Direct Connect Terminals | |
| UTBK-50 | Direct connect 50-pin removable screw terminal board $49 |
| Cable Connect | |
| CAB50F-6 | 50-pin ribbon cable with female header connectors, 6 feet long $30 |
| C104-50F-12 | 50-pin ribbon cable with female headers, 12″ long $15 |
| STB-50U | Spring-cage terminal board for 50-pin mating connector. $49 |
| STB-50U Kit | Spring-cage terminal board (STB-50U) and mounting kit. Includes STB-50U, cable and specialized mounting hardware. $69 |
| STB-50 | DIN-rail mountable screw terminal board with latches for 50-pin header $44 |
| Mounting Hardware | |
| MP104-DIN | DIN-rail mounting provision |
| USB | |
| CUSB-EMB-HDR | 30″ USB 1×5 standard header to micro OEM cable $19 |
| CUSB-EMB-HDRM | 30″ USB 1×5 metric header to micro OEM cable $19 |
| CUSB-EMB | 6″ micro-fit to micro-fit embedded OEM cable $19 |
| USB-104-HUB | Rugged, industrial grade, 4-port high-speed USB 2.0 hub |
| Options (call for pricing) | |
| -E | Economy module, no screw terminal board |
| -OEM | Board only model, no enclosure or screw terminal board |
| -P | External power components and AC/DC adapter |
| -ST | External power components & screw terminals for power input (high retention) |
| -T | Extended operating temperature (-40°C to +85°C) |
| -RoHS | RoHS compliant version |