USB
Showing 1–15 of 30 results
-
AccessoriesANDROID-232 Controls Legacy RS-232 Devices from Android Devices
Features
- Android USB 2.0 Full-Speed Host to industry standard RS-232 DB9M serial port
- Supports UART interface with RX, TX, RTS and CTS
- RX buffer size 5512 bytes; TX buffer size 256 bytes
- Supports baud rates up to 460.8kbps, 921.6kbps optional
- Use with any Android platform supporting Android Open Accessory Mode (typically 3.1 or above)
- ±15kV ESD protection on USB data lines and all RS-232 signals
- Status and fault LEDs including external power, charging status, and USB status
- Supports USB charging for Android devices
- Type A USB connector features industrial strength high retention design
- Latching +5V external power input connector with external regulated power supply
- Industrial operating temperature (-40°C to +85°C) standard
- A hard line wired connection eliminates security concerns associated with Wi-Fi and other radio frequency solutions
- RoHS Compliant
FACTORY OPTIONS
- RJ12 female for RS-232, including GPS signals on RJ12 and J5 connector
- RJ45 connector with Cisco pinout
- RJ12 connector
- Baud rates up to 921.6kbps
- RoHS Available. Please contact us for ordering information
(0 reviews)$139.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Input
DAQ-PACK Multifunction Analog/Digital I/O w/Flexible Signal Conditioning
Features
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 500kHz
- 12 or 16-bit resolution A/D converter
- Flexible, software configured functionality
- High density, up to 128 single-ended or differential analog inputs
- 18 input ranges, 9 unipolar and 9 bipolar, per 8-channel programmable
- Wide range of flexible signal conditioning types
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- 2 16-bit analog outputs available
- 16 high-current digital I/O lines
- 16-bit programmable counter/timer
- I/O connections made via DB37 and DB25 connectors
- Small, rugged, industrial gold-zinc plated steel enclosure
- All required power drawn from provided instrument quality external power supply
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Reference junction sensor w/two 37-pin terminal blocks
- Extended temperature and DIN rail mounting provisions
- OEM version (boards only) features PC/104 module size and mounting compatibility and can be found on the USB-AIO16-128A-OEM page.
- RoHS version available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
SIGNAL CONDITIONING OPTIONS
- Unipolar and bipolar ranges of 1mV, 5mV, 10mV, 20mV, 50mV
- RC filters
- 4-20mA or 10-50mA current inputs
- RTD measurement
- Bridge completion
- Thermocouple break detection and cold-junction compensation (CJC) temperature sensor
- Voltage divider
- +10V sensor excitation
(0 reviews)$1,132.00 – $2,868.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Input
DAQ-PACK M Series Multifunction Analog/Digital I/O
Features
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 500kHz
- 12 or 16-bit resolution A/D converter
- Flexible, software configured functionality
- 64 single-ended or 32 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, per 4-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- 2 16-bit analog outputs available
- 16 high-current digital I/O lines
- 16-bit programmable counter/timer
- I/O connections made via DB37 and DB25 connectors
- Small, rugged, industrial gold-zinc plated steel enclosure
- All required power drawn from USB port, no external power adapter required
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
Factory Options
- Industrial operating temperature (-40°C to + 85°C)
- Reference junction sensor w/two 37-pin terminal blocks
- DIN rail mounting provisions
- OEM version (boards only) features PC/104 module size and mounting compatibility and can be found on the USB-AIO16-64MA-OEM page.
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$844.00 – $1,233.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USBP-DIO16RO8 USB, Pico-I/O™ Sized Digital I/O and Relay Board Family
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16-channel TTL/LVTTL digital I/O
- All 16 I/O lines buffered with 32mA sink/source current capabilities
- 8 Form C electromechanical relays switch 1A
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Pico-I/O™ module size (60mm x 72mm) & mounting capability
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature (-40°C to +85°C) operation
(0 reviews)$139.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-104-HUB / USB-3.5-HUB Rugged, Industrial Grade, 4-Port High-Speed USB 2.0 Hub
FEATURES
- Rugged, industrialized, four-port USB hub
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Advanced EFT, Lightning, and ESD protection at ±20kV on all signal pins (air and contact)
- Extended temperature (-40°C to +85°C) for industrial grade applications
- Data transfer rates up to 480 Mbps
- Supports bus powered and self powered modes
- Three power input connectors (power jack, screw terminals, or 3.5″ drive Berg power connector)
- LED status indicators for power and overcurrent fault conditions for each downstream port
- USB/104 form-factor for OEM embedded applications
- OEM version (board only) features PC/104 module size and mounting compatibility
- Includes micro-fit embedded USB header connectors in parallel with all standard USB connectors
- USB connectors feature industrial strength and high-retention design
- Small (4″ x 4″ x 1″), low profile, steel enclosure
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Header connectors with jumper posts for panel mounted user status LED connection
- 3.5” front panel drive bay mounting provision
- Wide Input power from 7VDC to 35VDC at the DC power jack or screw terminals
- RoHS Available. Please contact us for ordering information
(0 reviews)$214.00 – $219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Accessories
USB-104-IHUB Rugged, Industrial-Strength 4-Port Isolated USB Hub
Features
- Rugged, industrialized, four-port USB hub
- Tru-Iso™ signal isolation up to 4kV meets EN60601 standards
- Advanced EFT, Lightning, and ESD protection at ±20kV on all signal pins (air and contact)
- Full-speed USB 2.0 device, USB 3.1 and 1.1 compatible
- Power jack and screw terminals (high retention) for external power.
- Downstream ports capable of low-speed (1.5 Mbps) and full-speed (12 Mbps) transfers aggregate
- LED indicators for power and fault conditions for each downstream port
- Upstream and downstream short-circuit protection
- Industrial grade USB connectors feature high-retention design
- Includes micro-fit embedded USB header connectors in parallel with all standard USB connectors
- Industrial operating temperature (-40°C to +85°C)
- Small (4″ x 4″ x 1″), low profile, steel enclosure
FACTORY OPTIONS
- OEM (board only) version with PC/104 mounting holes and footprint for flexibility in embedded applications
- Header connectors with jumper posts for panel mounted user status LED connection
- Wide Input power from 7VDC to 35VDC at the DC power jack or screw terminals
- RoHS Available. Please contact us for ordering information
(0 reviews)$295.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-232-IND, USB-422-IND, USB-485-IND, USB-422-485-IND
FEATURES
- RoHS compliant, single-port serial communications adapter for USB 2.0 or 3.0
- Add a RS-232, RS-422 or RS485 serial port to any USB equipped computer
- Compact, industrial, military-grade metal backshell
- Industrial operating temperature (-40°C to +85°C) standard
- Includes type FT232R UART with 128-byte receive/256-byte transmit FIFO buffers
- Supports 7 or 8 data bits, 1 or 2 stop bits, and odd /even / mark / space / no parity
- ±15kV ESD Protection (IEC 6100) on all RS-232/422/485 signals protects against spikes and ground loops
- Fully shielded cable protects data from EMI and RF interference
- Software programmable baud-rates
- All required power drawn from host USB port, no external power adapter required
- Supported for use in Windows (including Windows CE) and Linux operating systems
- Designed, made, supported, and manufactured in the USA
USB-232-IND
- Supports all RS-232 signals, including handshaking
- Data transfer speeds up to 1Mbps asynchronous
USB-422-IND
- Supports full-duplex (4-wire) RS-422 protocol
- Data transfer speeds up to 3Mbps asynchronous
USB-485-IND
- Supports multi-drop (2-wire, half-duplex) RS-485 protocol
- Data transfer speeds up to 3Mbps asynchronous
USB-422-485-IND
- Supports full-duplex RS-422/485 protocol
- Supports 4-wire RS-485 protocol
- Data transfer speeds up to 3Mbps asynchronous
- Pinout compatible with legacy model USB-485
FACTORY OPTIONS
- Removal of RC Termination from receiver lines (RS-422 and RS-485 models)
- To fully comply with IEC60945 and IACS E10, the factory option Halogen Free Flame retardant (HFFR) cable is required
(0 reviews)$98.00 – $119.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Input
USB-AI16-2A Dual Channel 16-Bit 2MS/Second Simultaneous Analog/Digital Input Board
FEATURES
- High-speed USB 2.0 device, USB 3.0 compatible
- Two 1MHz 16-bit A/D converters for 2MHz aggregate sampling rate
- Analog and digital inputs acquired simultaneously, with timestamping
- 16 kSample FIFO (shared by all inputs)
- Per channel software selectable ranges of 0-1V, 0-2V, 0-5V, 0-10V, ±1V, ±2V, ±5V, ±10V
- Eight digital I/O’s (four inputs & four high-current outputs)
- High retention USB type B connector for vibration-proof, worry-free communications
- Alternate USB micro-fit header can be used to reduce board footprint in embedded applications
- Small rugged steel industrial enclosure
FACTORY OPTIONS
- OEM version (board only) features PC/104 module size and mounting compatibility
- Extended temperature (-40° to +85°C)
- External power
- Screw terminals for power input provide high retention connection
- LVTTL DIO lines
- RoHS compliant product
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$595.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-AIO16-16F: 16 Channel, Multifunction Analog Input/Output USB Module Family
FEATURES
- High-speed USB 2.0 multifunction DAQ
- Sustained sampling speeds up to 1MHz
- 16-bit or 12-bit resolution A/D converter
- Flexible, software configured functionality
- 16 single-ended or 8 differential analog inputs
- 8 input ranges, 4 unipolar and 4 bipolar, channel-by-channel programmable
- Autocalibration and oversampling for real-time accurate data
- A/D starts via software, timer, or external trigger
- Two or four 16-bit analog outputs; 4kHz update rate
- 16 high-current digital I/O lines
- Alternate micro-fit embedded USB header connector
- USB/104 form-factor for OEM embedded applications
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- All required power drawn from USB port, no external power adapter required
- Industrial strength and high-retention Type B USB connector
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Pseudo-differential analog inputs
- External power for high current capabilities
- Screw terminals for power input provide high retention connection
- Industrial operating temperature (-40°C to +85°C)
- OEM (board only) version for embedded applications
- Single-ended current inputs (4-20mA or 10-50mA)
- Voltage dividers per input
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$419.00 – $924.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
USB-AO-ARB1: 8MHz 16-bit Analog Waveform Output USB Board
FEATURES
- High-Speed USB 2.0 Device (USB 3.0+ Compatible)
- High-Retention USB Connector
- Fast Waveform Output; Up to 8M Samples/Sec
- Small, Portable Digital to Analog Single-Ended Output at 16-Bit Resolution
- 16K Sample FIFO Buffer On-Board
- Jumper Selectable Analog Output Ranges of:
0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V - Two 4-Bit I/O Ports Independently Selectable for Inputs or Outputs
- All 8 DIO Lines Buffered with Sink 32mA / Source 32mA Current Capabilities
- Jumper Selectable 10KΩ Pull-Up/Pull-Down Resistors on DIO Lines
- Standard 16-Pin IDC Connector for DIO and Gate
- BNC Connectors for DAC Output and Gate Control
- PC/104 Module Size and Mounting Compatibility
- Alternate Embedded USB Connector
- Small, Rugged, Industrial Enclosure
FACTORY OPTIONS
- Board only, without enclosure, features PC/104 module size and mounting compatibility
- Extended Temperature (-40°C to 85°C)
- +5VDC regulated AC/DC supply and onboard DC-power input jack
- Screw terminals installed for DC-power input (no jack, no wall-wart)
- Replace +5VDC digital logic with +3.3V I/O
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$395.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
USB-AO16-16A Analog Output Module
Features
- 4, 8, or 16 analog outputs with 12 or 16-bit resolution
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- Unipolar and bipolar output ranges of 0-10V, ±5V (contact factory for additional ranges)
- Real-time hardware calibration per channel
- Update outputs individually or simultaneously at speeds up to 4kHz
- Two 16-bit analog inputs and 16 lines of digital I/O
- All digital I/O lines buffered with 10mA source, 24mA sink current capabilities
- Resettable 0.5A fused +5V available to the user
- Includes external AC to 12V @ 1Amp DC regulated adapter
- Connections made via industry-standard 37-pin D-Sub connectors
- USB/104 form-factor for OEM embedded applications
- Standard (enclosed) version includes external 12V power supply (USB-PWR-12V)
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small, (4″ x 4″ x 1.25″) rugged, industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended operating temperature (-40° to +85°C)
- Analog output ranges (±10V, 0-5V, or nearly anything you specify!)
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Screw terminals for 12V input power connection
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 – $769.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-CTR-15 Counter/Timer Module
Features
- High-Speed USB 2.0 device, USB 3.0 compatible
- Fifteen independent 16-bit counter/timers (5 x 82C54-10)
- Clock, gate and out signals from all 15 channels buffered and accessed via 1 connector
- Supports input frequencies up to 10MHz
- Standard configuration adapter pre-configured for event counting, frequency measurement, pulse width measurement, or frequency generation
- Removable screw-terminal board for easy wiring
- User wiring adapter card provided for flexible yet easy counter concatenation/configuration
- PC/104 module size (3.550″ by 3.775″) and mounting compatibility
- Rugged small-sized (4″ x 4″ x 1.25″) steel enclosure
- Type B USB connector features industrial strength and high-retention design
(0 reviews)$299.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
USB-DA12-8: 8-Channel, 12-Bit Analog Waveform Output USB Module
Features
- High-speed USB 2.0 device
- Up to 125K conversions per DAC per second
- Streaming waveform data at over 400,000 DAC outputs per second total
- 128K Sample buffer on-board, or Infinitely long streaming waveforms!
- Buffered waveforms at up to 1 million DAC conversions per second total
- ILDA compatible
- Small, portable 8-channel, 12-bit, digital to analog outputs
- Double-buffered allowing simultaneous update of all DACs
- Analog output ranges of 0-2.5V, 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Single-ended and differential outputs on separate connectors
- PC/104 module size and mounting compatibility
- Rugged small-sized (4″ x 4″ x 1.25″) steel enclosure
- Type B USB connector features industrial strength and high-retention design
- Designed, made, supported, and manufactured in the USA
Factory Options
- Resistors in series with differential connector for impedance matching
- DIN rail mounting provision
- Economy ‘E’ version available without screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$399.00 – $629.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-16H: 16-bit Family of Digital Waveform I/O USB Modules
FEATURES
- High-speed USB 2.0 device
- 16 high-speed digital I/O lines feature continuous, sustained throughput up to 16 MB/s
- Capable of 80 MB/s bursts with flexible synchronous clock and handshaking capabilities
- Continuous streaming over USB with no maximum waveform length
- On-board embedded FIFO memory up to 128 kByte
- 18 additional digital I/O lines arranged in 4 programmable groups
- All outputs buffered with 24 mA sink/source capabilities
- Type B USB connector features high-retention design
- Standard 68-pin SCSI high density latching connector
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- Industrial strength and high-retention Type B USB connector
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- LVTTL for 3.3V applications
- Input only, output only, and input/output versions
- OEM version (board only) features PC/104 module size and mounting compatibility
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- RoHS available, please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$379.00 – $859.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-32: 32-Bit Digital Input/Output USB Module
FEATURES
- Small (3.5 by 3.7 in.), portable, 32-channel Digital I/O USB module
- Four 8-bit ports independently selectable for inputs or outputs
- High-Speed USB 2.0 device, USB 3.0 compatible
- All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
- Standard 50-pin IDC connector with key
- Removable screw terminal adapter for easy wiring
- USB/104 form-factor for OEM embedded applications
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small (4″ x 4″ x1.25″) rugged industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Three 82C54 counter/timers
- Extended operating temperature (-40° to +85°C)
- External power components and AC/DC adapter
- Screw terminals for power input provide high retention connection
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- 24-channel version compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$194.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
