PCI Express Mini
Showing 1–15 of 17 results
-
Digital I/O
mPCIe-IDIO-8HL Isolated Input Relay Output Card
FEATURES
- mPCIe (PCI Express Mini Card) Type F1 and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected FET outputs
- Available as High-Side switch from 6 to 48 VDC at up to 1A
- or Low-Side switch from 5 to 48 VDC at up to 0.5A
- or half high-side and half low-side
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- RoHS standard
- Available in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews) -
Analog Input
mPCIe-ADIO16-8F
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 16-Bit 1MSPS Complete Data Acquisition System
- Sustained Sampling Rates Up To 1MHz
- High Impedance, 8-Channel Input: 1 MΩ
- Differential Input Voltage Ranges from ±0.64V to ±24.576V
- Flexible, Software Configured Functionality
- 8 Pseudo-differential (Single-Ended) or 4 Differential Inputs
- Fast DMA transfers from 4 kSample FIFO
- Four 16-Bit Analog Outputs
- Independently Programmable Outputs: 0V To 5V, 0V To 10V, ±2.5V, ±5V, ±10V
- Outputs Drive ±10mA Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- 16 Digital lines with alternate functions including ADC and DAC Trigger
- RoHS Standard
- Available now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
(Single Ended or Differential options) - Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$249.00 – $669.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Input
mPCIe-DAAI16-8F Family
FEATURES
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 8× 16-bit DACs capable of Current or Voltage, Waveform streaming at up to 125 ksps, each
- Software selectable as Voltage or Current output, per channel
- 0-24mA, 0-20mA, and 4-20mA current output ranges
- 5V, 10V, ±5V and ±10V voltage output ranges (with optional 20% overrange)
- Internal or External Clock and Trigger
- Per-Channel offset/scale calibration
- 16-bit, Bipolar, Differential, A/D sampling at up to 1MHz
- Software selectable as 8 Single Ended or 4 Differential channels
- 7 channel-by-channel programmable differential input ranges from ±0.3125V up to ±12V
- High impedance input: 500 MΩ
- FIFO plus DMA for efficient, robust data streaming
- 8× Digital I/O pins (4 inputs and 4 outputs)
- RoHS compliant standard
FACTORY OPTIONS INCLUDE
- One HART channel
- ADC current input (4-20mA, 10-50mA)
- Voltage dividers per input
- Extended temp operation
(0 reviews) -
Analog Output
mPCIe-AIO16-16F
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, Multi-Function DAQ with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- DMA+FIFO (4 kSamples) for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Vibration-resistant epoxy and/or conformal coating
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $859.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
mPCIe-COM-4SM Family
Features
- PCI Express Mini Card (mPCIe) Type F1, With Latching I/O Connectors
- Four And Two-Port mPCIe Serial Cards With Optional DB9M Connectivity
- Four Software Selectable Serial Types: RS-232, RS-422, And RS-485 (2Wire & 4Wire)
- “SM” Models Support All 3 Serial Types. “S” Models Support RS-422 And RS-485
- High Performance 16C950-Class UARTs With 128-Byte FIFO For Tx And Rx Buffering
- Supports Data Communication Rates To 921.6Kbps In RS232 – As High As 3Mbps In Differential Modes – 10Mhz With Custom Crystal Option
- Port-By-Port Field Selectable Termination For RS422 & RS485 Applications
- Virtually Any Custom Baud Rate May Be Configured By The User Via Register Settings, No Custom Oscillator Needed
- ±15kV ESD Protection On All Signal Pins
- Supports CTS, RTS, And 9-Bit Data Mode
- RoHS And Industrial Temp (-40°C To 85°C) Both Standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$149.00 – $219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-DIO-24X
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
-
Digital I/O
mPCIe-DIO-24S Family
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- “S” models now include Digital Integration Features
- 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 bits with Pulse Train (“generate n pulses”) and PWM generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- CMOS signaling with user supplied VCCIO (5V)
- 10 kΩ Pull-downs
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$208.00 – $238.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
PCI Express Mini
mPCIe-ICM232-4 Isolated Serial Card Family
Features
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 4 or 2-port mPCIe RS232 serial cards with optional DB9M connectivity
- 500V isolation port-to-port and 1500V isolation port-to-computer on ALL signals
- High performance 16C950 class UARTs with 128-byte FIFO for each transmit and receive buffer
- Supports data communication rates to 921.6kbps
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- Supports CTS and RTS
- RoHS and Industrial Temp (-40°C to +85°C) both standard
- Available Now in M.2 form
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$164.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
mPCIe-ICM422-4 Isolated Serial Card Family
Features
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 4, 2, or 1-port mPCIe RS422 serial cards with optional DB9M connectivity
- 500V isolation port-to-port and 1500V isolation port-to-computer on ALL signals
- High performance 16C950 class UARTs with 128-byte FIFO for TX and RX buffering
- Supports data communication rates as high as 3Mbps – 12MHz with custom crystal
- Port-by-port termination. Order -NT option for no termination.
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- RoHS and Industrial Temperature (-40°C to +85°C) both standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$164.00 – $259.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
mPCIe-ICM485-4 Isolated Serial Card Family
Features
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 4, 2, or 1-port mPCIe RS485 serial cards with optional DB9M connectivity
- 500V isolation port-to-port and 1500V isolation port-to-computer on ALL signals
- High performance 16C950 class UARTs with 128-byte FIFO for TX and RX buffering
- Supports data communication rates as high as 3Mbps – 12MHz with custom crystal
- Port-by-port termination. Order -NT option for no termination.
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- RoHS and Industrial Temperature (-40°C to +85°C) both standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$164.00 – $259.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-IDIO-8
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Models now include Digital Integration Features
- Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin Female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4 (Pulled up)
- RoHS standard
-
- Ask about Digital Integration Features!
- Outputs with pulse/train / PWM / frequency / and Quadrature generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Pull down LVTTL lines.
- TTL: CMOS signaling with user supplied VCCIO (+5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-ISODIO-16 Isolated Digital I/O Card
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with Latching I/O Connector
- 8 Isolated Inputs
- 8 Isolated Outputs
- 3.3V Signaling
- Using the Latest Isolation Technology with 5000V Isolators
- Per IPC-22B: 1500V Isolation-I/O-to Computer on All Signals
- Change-of-State (COS) Detection IRQ Generation
- 18KV ESD Diode Protection
- On-Board 32-Bit Timer Watchdog to Reset Board to Default Power-Up Values
- RoHS Compliant
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
(0 reviews)$129.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-II-16
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 16, 8 or 4 optically isolated, non-polarized inputs up to 31VDC/AC
- Models now include Digital Integration Features
- up to 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Panel-mountable isolation module with 37-pin male D-Sub connector
- 4 LVTTL I/O lines programmable as inputs or outputs in groups of 2 lines
- 9” cable (228MM), standard, connects isolation module to mPCIe-DIO card
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$218.00 – $323.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-IIRO-8
FEATURES
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs
- 8 OR 4 electromechanical 1A relay outputs
- Models now include Digital Integration Features
- 8 or 4 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 or 4 bits with Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +70°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Ethernet
mPCIe-LAN-GbE Gigabit Ethernet Card
Features
- PCI Express Mini Card (mPCIe) Type F1, with Latching I/O Connectors
- Rugged design includes overvoltage protection and buffering on all signals
- Onboard magnetics with built in isolation via transformer coupling
- Industrial Temperature (-40 to +85°C) and RoHS standard
- 10/100/1000 Base-T interface on mPCIe
- PCI Express v2.1 (2.5gt/s) interface
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
Factory Options
- Low-PPM XTAL to support IEEE 1588 Precision Timing Protocol
(0 reviews)$144.00 Add To Quote This product has multiple variants. The options may be chosen on the product page