PC/104
Showing 1–15 of 26 results
-
Analog Input104-AIM-32 PC/104 Analog Multiplexer Board
Features
- Designed to pair with an A/D board to increase channel count and signal conditioning capabilities
- 32 single-ended or 16 differential inputs
- 6 software programmable ranges:
- ±25mV, ±50mV, ±0.1V, ±2.5V, ±5V, ±10V
- Up to 7 104-AIM-32s can be stacked per A/D board for up to 224 S.E. or 112 diff. inputs
- +5VDC only operation
- Precision 15VDC sensor excitation
- 0 to 70°C operating temperature (-40 to +85°C Optional)
- Input Signal Conditioning Options:
- 4-20mA inputs
- RTD measurement
- Thermocouple measurement
- Voltage divider on each input
- RC filters on each input
- Bridge completion configuration
RoHS Available. Please contact us for ordering information.
(0 reviews)$310.00 – $395.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Input
104-AIO16A/E 16-Bit, 16-Channel, PC/104 Multifunction Analog I/O Boards
Features
- 16-bit resolution A/D
- Up to 500kHz sampling rate
- 16 single-ended or 8 differential analog inputs
- 10 input ranges, unipolar or bipolar
- A/D starts from software, timer and external trigger
- Single channel or scan A/D modes
- On-board calibration reduces A/D converter offset and gain errors
- Noise reduction with channel oversampling
- Over-voltage protection of -40V to +55V
- 1024 sample data FIFO for A/D
- Two 12-bit D/A outputs and 16 high-current digital I/O lines
- DAC error calibration
- 16-bit programmable counter/timer
Factory Options
- FIFO up to 4K sample
- Programmable amplifier with gains of 1, 10, 100, and 1000
- Onboard DC/DC converter enables operation from a single +5V power supply
- Extended temperature operation (-40°C to + 85°C)
- RoHS Available. Please contact us for ordering information
(0 reviews)$579.00 – $729.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
104-COM232-8 Serial Board
Features
- 8, 4 or 2 RS-232 asynchronous serial COM ports
- Speeds up to 230.4K with 64-byte FIFO
- Programmable IRQ sharing simplifies system design and installation
- Low power required: +5VDC at 80mA typical
- Operates as a standard COM port in all operating systems
Factory Options: (call for pricing and availability)
- 128-byte FIFO
- 0 to 70°C and -40 to +85°C versions available
- RoHS Available. Please contact us for ordering information
- Designed, made, supported, and manufactured in the USA
(0 reviews)$119.00 – $219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Accessories
104-AIM-ADAP
PC/104 stacking card to adapt AIM-16 Analog Input Multiplexer to our 104/AIO12-8 Card for connecting with many thermocouples, RTDs, etc.
(0 reviews) -
PC/104
104-AIO12-8 Multifunction Analog I/O Board
PC/104 Analog I/O Board
Features
- Eight true differential inputs, or eight single-ended inputs optional
- Programmable input ranges of: 0-5V, 0-10V, ±5V, ±10V
- 100KHz sampling rate
- On-board pacer clock and counter timers
- Four double-buffered analog outputs
- Jumper selectable output ranges of: 0-5V, 0-10V, ±5V, ±10V
- 24 digital I/O lines, type 82C55 with change of state detect on port C, buffers on ports A & B
- Flexible configurations to suit your needs
Factory Options: (call for pricing and availability)
- 4-20mA inputs with offset
- Channel by channel pre-amplifier gains of 1-100
- +5VDC only operation
- 0 to +70°C and -40 to +85°C versions available
- RoHS Available. Please contact us for ordering information
(0 reviews)$399.00 – $494.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
104-AO12-4 PC/104 Analog Output Board
Features
Analog Output:
- 4 channels, 12 bit resolution
- Selectable unipolar or bipolar ranges 0-5V, 0-10V, ±5V, ±10V
- 100K conversions per second
- 3mA drive
Digital Input/Output:
- 24 parallel bits (two 8 bit ports, two 4 bit ports)
- 64mA sink, 32mA source (ports A and B)
- I/O pulled up to 5V
- Change of state detect on port C
- Type 82C55 PPI mode 0 (1 and 2 optional)
- Industry Standard 50 pin header
Timer/Counter: Type 82C54 (3×16 bit)
- Software Supported Modes:
- Three 16-Bit type 82C54
- Event counter, Frequency output
- Frequency and Pulse measurement
I/O Connectors:
- Two Industry Standard 50 pin headers
RoHS Available. Please contact us for ordering information
(0 reviews)$268.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
104-COM-8S
Features
- 8, 4, or 2 independent asynchronous serial COM ports
- Field selectable RS-422 and RS-485, independent for each port
- Auto-RTS feature makes half-duplex RS-485 communications effortless
- Speeds up to 921.6K
- Fixed bias and jumper selectable termination provided on each transmit and receive channel simplifies cabling
- Programmable individual non-volatile base addresses and IRQs simplifies installation
- Low power required: +5VDC at 80 mA typical
- Operates as a standard COM port in all operating systems
Factory Options
- Extended operating temperature (-40°C to +85°C)
(0 reviews)$119.00 – $219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
104-COM-8SM
Features
- 8, 4, or 2 independent asynchronous serial COM ports
- Field selectable RS-232, RS-422 and RS-485, independent for each port
- Auto-RTS feature makes half-duplex RS-485 communications effortless
- Speeds up to 921.6K with 64-byte FIFO (RS-232 is 230K max)
- Fixed bias and jumper selectable termination provided on each transmit and receive channel simplifies cabling
- Programmable individual non-volatile base addresses and IRQs simplifies installation
- Low power required: +5VDC at 80 mA typical
- Operates as a standard COM port in all operating systems
- Extended operating temperature (-40°C to +85°C) on the 4 and 8 port versions
Factory Options
- RoHS compliant version
- Extended operating temperature (-40°C to +85°C) on 2-port version
(0 reviews)$169.00 – $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
104-DA12-8A
PC/104 Analog Output Board with Arbitrary Waveform Generation
- Broadly Configurable Arbitrary Waveform Generator (ARB)
- DACs Independently Programmable with Unique Waveforms
- 128K SRAM for ARB data storage
- Independent 12-bit D/A converter per channel
- DACs independently or simultaneously updated
- Output ranges of 0-5, 0-10, +/-5, +/-10V, corresponding 4-20mA output
- 32-bit counter for precisely timed outputs
- 16-bit counter for interrupt generation
- On-board DC/DC converter allows operation on +5V power
- Optional -40 to +85°C operating temperature
- Available in 4 and 8 channels, with or without the ARB
- RoHS Available. Please contact us for ordering information
(0 reviews)$304.00 – $669.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
PC/104
104-DIO-48E/24E Digital I/O Cards
Features
- 48 Parallel Bits of Digital I/O Type 82C55 PPI mode 0
- Compatible with Opto-22 type Solid State Module Racks
- Two 24 bit groups (two 8 bit ports, two 4 bit ports each group)
- All bits are buffered, 64mA sink, 32m A source
- I/O pulled up to 5V for Contact Monitoring, Pulldown resistors are an option (factory installation)
- Fused (resetable) 5V available on pin 49 of each group
- I/O connectors: Two Industry Standard 50 pin headers plus one ten-pin header for counter timer
Factory Options: (call for pricing and availability)
- 82C54 with three 16-bit counter/timers for event counting, frequency output, pulse width and frequency measurement
- 0 to 70°C and -40 to +85°C versions available
- Pull-down resistors on I/O lines
- RoHS Available. Please contact us for ordering information
(0 reviews)$129.00 – $179.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
104-DIO-48S Digital I/O Board w/CoS IRQ
Features
- 48 or 24 parallel lines of 82C55 digital I/O with tristate buffers prevent unintended control of external equipment
- IRQ on input change of state (COS) eliminates the need for constant polling
- High sink/source current 64mA/32mA
- I/O pulled up to 5V for contact monitoring
- Compatible with Opto-22 and other industry standard I/O racks
Factory Options: (call for pricing and availability)
- 82C54 with three 16-bit counter/timers for event counting, frequency output, pulse width and frequency measurement
- 0 to 70°C and -40 to +85°C versions available
- Economy version without COS feature
- Pull-down resistors on I/O lines
- RoHS Available. Please contact us for ordering information
(0 reviews)$164.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
104-ICOM-2S
Features
- 2 independent optically-isolated asynchronous serial COM ports
- Field selectable RS-422 and RS-485, independent for each port
- Auto-RTS feature makes half-duplex RS-485 communications effortless
- Fixed bias and jumper selectable termination provided on each transmit and receive channel simplifies cabling
- Speeds up to 115.2K
- Operates as a standard COM port in all operating systems
- RoHS Available. Please contact us for ordering information
- Factory Options: (call for pricing and availability)
- 16850 UART’s with 128-byte FIFO
- Speeds up to 460.8K
- 0 to 60 C and -40 to +85 C versions available
(0 reviews) -
PC/104
104-IDI-48 PC/104, 48 Isolated AC/DC Input Board Family
Features
- 48 individually optically isolated AC/DC inputs
- Polarity-insensitive AC/DC inputs accept up to 60 VDC or AC rms
- AC or voltage transient filtering
- Optically isolated channel-to-channel and channel-to-ground
- Designed, made, supported, and manufactured in the USA
Factory Options: (call for pricing and availability)
- 0 to 70°C and -40 to +85°C versions available
- Change-of-state detection (COS IRQ) on selected inputs
- Higher input ranges
- Right-angle or vertical I/O connectors
- RoHS Available. Please contact us for ordering information
(0 reviews)$289.00 – $349.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
104-IDIO-16 Isolated DIO Board
Features
- 16 or 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms
- IRQ on input change of state (COS) eliminates the need for constant polling
- Slow/fast filter to accommodate AC voltages and noisy DC inputs
- 16 or 8 optically-isolated fully protected high-current sourcing solid state outputs
Factory Options: (call for pricing and availability)
- 0 to 70°C and -40 to +85°C versions available
- Economy version without COS feature
- Input only and output only versions
- Expanded input voltage levels
- RoHS Available. Please contact us for ordering information
(0 reviews)$139.00 – $299.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
104-II32-4RO
Features
Inputs
- 32 Optically Isolated Non-Polarized digital inputs
- Change of State (COS) Detection
- Interrupt Sharing
- 3 to 31 Volt AC or DC Signals
- Switchable Slow/Fast Filters
- Schmitt Trigger buffers
- Designed, made, supported, and manufactured in the USA
Outputs
- 4 Form C (NC, NO, C) SPDT Relays
- Contact ratings 24VDC @ 1A and 115VAC @ 0.5A
- +5V power with onboard 0.5A resettable fuse for external circuits
- RoHS Available. Please contact us for ordering information
(0 reviews)
