M.2
Showing all 14 results
-
Serial Communication
M.2-COM-4SM Family of Four and Two-Port Multi-Protocol RS-232/422/485 M.2 Cards
Features
- M.2 2260/2280 size with B & M keys and Latching I/O Connectors
- Four- And Two-Port M.2 Serial Cards With Optional DB9M Connectivity
- Four Software-Selectable Serial Types: RS-232, RS-422, And RS-485 (2Wire & 4Wire)
- “SM” Models Support All 3 Serial Types. “S” Models Support RS-422 And RS-485
- High Performance 16C950-Class UARTs With 128-Byte FIFO For Tx And Rx Buffering
- Supports Data Communication Rates To 921.6Kbps In RS232 – As High As 3Mbps In Differential Modes – 10Mhz With Custom Crystal Option
- Port-By-Port Field Selectable Termination For RS422 & RS485 Applications
- Virtually Any Custom Baud Rate May Be Configured By The User Via Register Settings, No Custom Oscillator Needed
- ±15kV ESD Protection On All Signal Pins
- Supports CTS, RTS, And 9-Bit Data Mode, Half- and Full-Duplex communications
- RoHS And Industrial Temp (-40°C To 85°C) Both Standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
(0 reviews)$149.00 – $219.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-DIO-24X 24-Channel Digital I/O with Digital Integration Features on M.2
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
-
Digital I/O
M.2-DIO-24S Digital I/O Card
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- “S” models now include Digital Integration Features
- 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 bits with Pulse Train (“generate n pulses”) and PWM generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- CMOS signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$208.00 – $238.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
M.2-ICM232-4 Two and Four Port Isolated RS232 M.2 Cards
Features
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 4 or 2-port mPCIe RS232 serial cards with optional DB9M connectivity
- 500V isolation port-to-port and 1500V isolation port-to-computer on ALL signals
- High performance 16C950 class UARTs with 128-byte FIFO for each transmit and receive buffer
- Supports data communication rates to 921.6kbps
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- Supports CTS and RTS
- RoHS and Industrial Temp (-40°C to +85°C) both standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$164.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
M.2-ICM422-4 One, Two, & Four Port Isolated RS422 M.2 Cards
Features
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 4, 2, or 1-port mPCIe RS422 serial cards with optional DB9M connectivity
- 500V isolation port-to-port and 1500V isolation port-to-computer on ALL signals
- High performance 16C950 class UARTs with 128-byte FIFO for TX and RX buffering
- Supports data communication rates as high as 3Mbps – 12MHz with custom crystal
- Port-by-port termination. Order -NT option for no termination.
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- RoHS and Industrial Temperature (-40°C to +85°C) both standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$164.00 – $259.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Serial Communication
M.2-ICM485-4 One, Two, & Four Port Isolated RS485 M.2 Cards
Features
- PCI Express Mini Card (mPCIe) type F1, with latching I/O connectors
- 4, 2, or 1-port mPCIe RS485 serial cards with optional DB9M connectivity
- 500V isolation port-to-port and 1500V isolation port-to-computer on ALL signals
- High performance 16C950 class UARTs with 128-byte FIFO for TX and RX buffering
- Supports data communication rates as high as 3Mbps – 12MHz with custom crystal
- Port-by-port termination. Order -NT option for no termination.
- Virtually any custom baud rate may be configured by the user via register settings, no custom oscillator needed
- ±15kV ESD protection on all signal pins
- Supports 9-bit data mode
- RoHS and Industrial Temperature (-40°C to +85°C) both standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$164.00 – $259.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-IDIO-8 Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Models now include Digital Integration Features
- Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-IDIO-8HL Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected FET outputs
- Available as High-Side switch from 6 to 48 VDC at up to 1A
- or Low-Side switch from 5 to 48 VDC at up to 0.5A
- or half high-side and half low-side
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews) -
Digital I/O
M.2-II-16 Isolated Digital Input Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 16, 8 or 4 optically isolated, non-polarized inputs up to 31VDC/AC
- Models now include Digital Integration Features
- Up to 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Panel-mountable isolation module with 37-pin male D-Sub connector
- 4 LVTTL I/O lines programmable as inputs or outputs in groups of 2 lines
- 9” cable (228MM), standard, connects isolation module to M.2-DIO card
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
(0 reviews)$218.00 – $323.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-IIRO-8 and M.2-IIRO-4 Isolated Input Relay Output Cards
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs
- 8 or 4 electromechanical 1A relay outputs
- Models now include Digital Integration Features
- 8 or 4 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 or 4 bits with Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +70°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$224.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Input
M.2-ADIO16-8F M.2 Card with 8 Single-Ended or 4 Differential Analog Inputs, 4 Analog Outputs, & 16 DIO
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 16-Bit 1MSPS Complete Data Acquisition System
- Sustained Sampling Rates Up To 1MHz
- High Impedance, 8-Channel Input: 1 MΩ
- Differential Input Voltage Ranges from ±0.64V to ±24.576V
- Flexible, Software Configured Functionality
- 8 Pseudo-differential (Single-Ended) or 4 Differential Inputs
- Fast DMA transfers from 4 kSample FIFO
- Four 16-Bit Analog Outputs
- Independently Programmable Output Ranges:
0V To 5V, 0V To 10V, ±2.5V, ±5V, ±10V - Outputs Drive ±10Ma Guaranteed
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Independently Programmable Output Ranges:
- 16 Digital lines with alternate functions including ADC and DAC Trigger
- RoHS Standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
(Single Ended or Differential options) - Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$249.00 – $669.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Analog Output
M.2-AIO16-16F M.2 Card with 16 Single-Ended or 8 Differential Analog Inputs and 4 Analog Outputs
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- 4 kSample FIFO plus DMA for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8 kSamples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- Works in your computers’ NVME slots!
- Available Now in mPCIe form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$319.00 – $859.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Ethernet
M.2-LAN-GbE Gigabit Ethernet Card
Features
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- Rugged design includes overvoltage protection and buffering on all signals
- Onboard magnetics with built in isolation via transformer coupling
- Industrial Temperature (-40 to +85°C) and RoHS standard
- 10/100/1000 Base-T interface on mPCIe
- PCI Express v2.1 (2.5gt/s) interface
- Designed, made, supported, and manufactured in the USA
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Support for Wind River VxWorks (call for ordering information)
Factory Options:
- Low-PPM XTAL to support IEEE 1588 Precision Timing Protocol
(0 reviews)$144.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
PCI Express Mini
M.2-QUAD 4 and 8 Channel Quadrature Encoder Input Products
Features
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- Direct Interface to Four or Eight Quadrature Encoders (A, B & Index (Z))
- Single-Ended Or Differential 3V or 5V Encoder Inputs
- 32-Bit Counters; Count Modes Include Quadrature (x1, x2, x4), Free-Run, NonQuadrature,(Up/Down), Non-Recycle, Modulo-N, and Range Limit
- Selectable Clock Source (10MHz, 20MHz & 40MHz) (For Digital Filtering On Inputs)
- Interrupt Generation From Various Status Changes
- Select Flags for Interrupt Source (Instantaneous Or Latched)
- Panel-Mountable DB-37F Four Channel Module
- Two Modules Daisy-Chainable for Eight Quadrature Inputs (Two DB-37F Connectors)
- 9” Cable(s) (228mm) Connect Between Quad Module(S) and mPCIe Card
- Available in Industrial Temperature Operation (-40°C To +85°C), RoHS Standard
- Also available in mPCIe form!
- Designed, made, supported, and manufactured in the USA
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$479.00 – $779.00 Add To Quote This product has multiple variants. The options may be chosen on the product page