24 Out
Showing all 2 results
-
Digital I/OPCIe-IDIO-24 Isolated Digital I/O Card Family
Features
- 24 optically isolated, non-polarized digital inputs
- Software configurable filters on inputs for electrically noisy environments
- Can detect input state change and assert interrupt
- 24 optically isolated high-side FET switches
- Opto-couplers rated for 2.5kV isolation
- Four optically isolated output groups and two optically isolated input groups
- 8 non-isolated TTL/CMOS I/O lines
- Designed, made, supported, and manufactured in the USA
Factory Options
- Extended temperature operation (-40°C to +85°C)
- 12-channel version (with 4 TTL I/O) available
- Input only and output only versions available
- RoHS compliant version
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$289.00 – $439.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/OUSB-DIO48DO24 Digital I/O and FET Board
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 48 lines of digital I/O
- 24 fully protected and isolated FET 2A outputs
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Six (6) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating in 8-bit groups
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- Removable internal terminal board for ease of wiring
- PC/104 module size and mounting compatibility (3.550″ by 3.775″)
- Rugged, industrial, steel enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 24 I/O, 12 FET output version
- 24 FET output only version
- OEM (board only) version for embeddeed applications
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C)
- Screw terminals for power input provide high retention connection
- RoHS Compliant version. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$274.00 – $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
