Yes
Showing 1–15 of 36 results
-
Digital I/O104-DIO-48S Digital I/O Board w/CoS IRQ
Features
- 48 or 24 parallel lines of 82C55 digital I/O with tristate buffers prevent unintended control of external equipment
- IRQ on input change of state (COS) eliminates the need for constant polling
- High sink/source current 64mA/32mA
- I/O pulled up to 5V for contact monitoring
- Compatible with Opto-22 and other industry standard I/O racks
Factory Options: (call for pricing and availability)
- 82C54 with three 16-bit counter/timers for event counting, frequency output, pulse width and frequency measurement
- 0 to 70°C and -40 to +85°C versions available
- Economy version without COS feature
- Pull-down resistors on I/O lines
- RoHS Available. Please contact us for ordering information
(0 reviews)$164.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
PC/104
104-IDI-48 PC/104, 48 Isolated AC/DC Input Board Family
Features
- 48 individually optically isolated AC/DC inputs
- Polarity-insensitive AC/DC inputs accept up to 60 VDC or AC rms
- AC or voltage transient filtering
- Optically isolated channel-to-channel and channel-to-ground
- Designed, made, supported, and manufactured in the USA
Factory Options: (call for pricing and availability)
- 0 to 70°C and -40 to +85°C versions available
- Change-of-state detection (COS IRQ) on selected inputs
- Higher input ranges
- Right-angle or vertical I/O connectors
- RoHS Available. Please contact us for ordering information
(0 reviews)$289.00 – $349.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
104-IDIO-16 Isolated DIO Board
Features
- 16 or 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms
- IRQ on input change of state (COS) eliminates the need for constant polling
- Slow/fast filter to accommodate AC voltages and noisy DC inputs
- 16 or 8 optically-isolated fully protected high-current sourcing solid state outputs
Factory Options: (call for pricing and availability)
- 0 to 70°C and -40 to +85°C versions available
- Economy version without COS feature
- Input only and output only versions
- Expanded input voltage levels
- RoHS Available. Please contact us for ordering information
(0 reviews)$139.00 – $299.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
104-II32-4RO
Features
Inputs
- 32 Optically Isolated Non-Polarized digital inputs
- Change of State (COS) Detection
- Interrupt Sharing
- 3 to 31 Volt AC or DC Signals
- Switchable Slow/Fast Filters
- Schmitt Trigger buffers
- Designed, made, supported, and manufactured in the USA
Outputs
- 4 Form C (NC, NO, C) SPDT Relays
- Contact ratings 24VDC @ 1A and 115VAC @ 0.5A
- +5V power with onboard 0.5A resettable fuse for external circuits
- RoHS Available. Please contact us for ordering information
(0 reviews) -
Digital I/O
104-IIRO-16 Isolated Relay I/O Board
Features
- 16 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms
- IRQ on input change of state (COS) eliminates the need for constant polling
- Slow/fast filter to accommodate AC voltages and noisy DC inputs
- 16 long-life form C electro-mechanical relays switch up to 1A each
Factory Options: (call for pricing and availability)
- Economy version without COS feature
- Input only and relay only versions
- Expanded input voltage levels
- RoHS Available. Please contact us for ordering information
(0 reviews)$149.00 – $295.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
104-IIRO-8 Isolated Digital Input and Relay Output Cards
Features
- 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31VDC or AC rms
- IRQ on input change of state (COS) eliminates the need for constant polling
- Slow/fast filter to accommodate AC voltages and noisy DC inputs
- 8 long-life form C electro-mechanical relays switch up to 1A each
- 8 non-isolated TTL compatible inputs
Factory Options: (call for pricing and availability)
- Economy version without COS feature
- Input only and relay only versions
- Expanded input voltage levels
- RoHS Available. Please contact us for ordering information
(0 reviews)$169.00 – $189.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
LPCI-IIRO-8 Low Profile Isolated Digital Input/Output PCI Card
Features
- 8 optically-isolated, non-polarized CMOS compatible digital inputs accept ±31volts DC or AC rms
- 8 form C electro-mechanical relays switch up to 1 A each
- Universal PCI, PCI-X, 3.3V and 5V compatible (Call for PCI-Express availability)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$858.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-DIO-24X
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
-
Digital I/O
M.2-DIO-24S Digital I/O Card
FEATURES
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- “S” models now include Digital Integration Features
- 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 bits with Pulse Train (“generate n pulses”) and PWM generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- CMOS signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$208.00 – $238.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-IDIO-8 Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 OR 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected high-side FET outputs switch from 5 to 34VDC at up to 2A
- Models now include Digital Integration Features
- Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin female D-Sub connector
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$313.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-IDIO-8HL Isolated Input Relay Output Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected FET outputs
- Available as High-Side switch from 6 to 48 VDC at up to 1A
- or Low-Side switch from 5 to 48 VDC at up to 0.5A
- or half high-side and half low-side
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews) -
Digital I/O
mPCIe-IDIO-8HL Isolated Input Relay Output Card
FEATURES
- mPCIe (PCI Express Mini Card) Type F1 and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs up to 31VDC/AC
- 8 or 4 fully protected FET outputs
- Available as High-Side switch from 6 to 48 VDC at up to 1A
- or Low-Side switch from 5 to 48 VDC at up to 0.5A
- or half high-side and half low-side
- 8 LVTTL I/O lines programmable as inputs or outputs in groups of 4
- Change-of-State (COS) detection IRQ generation
- 9” cable (228MM), standard
- RoHS standard
- Available in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews) -
Digital I/O
M.2-II-16 Isolated Digital Input Card
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 16, 8 or 4 optically isolated, non-polarized inputs up to 31VDC/AC
- Models now include Digital Integration Features
- Up to 8 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- Panel-mountable isolation module with 37-pin male D-Sub connector
- 4 LVTTL I/O lines programmable as inputs or outputs in groups of 2 lines
- 9” cable (228MM), standard, connects isolation module to M.2-DIO card
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
(0 reviews)$218.00 – $323.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
M.2-IIRO-8 and M.2-IIRO-4 Isolated Input Relay Output Cards
FEATURES
- 2260/2280 sized M.2 Card with B & M keys and latching I/O connectors
- 8 or 4 optically-isolated non-polarized inputs
- 8 or 4 electromechanical 1A relay outputs
- Models now include Digital Integration Features
- 8 or 4 bits with Edge-selectable Event Counting, Pulse Width and PWM measurement, and per-bit Edge-selectable CoS IRQs
- 8 or 4 bits with Pulse Train (“generate n pulses”) and PWM generation
- 9” cable (228MM), standard
- Panel-mountable isolation module with 37-pin male D-Sub connector
- RoHS standard
- Works in your computers’ NVME slots!
- Available in PCI Express Mini (mPCIe) form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +70°C)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$224.00 – $408.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-DIO-24X
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
