Yes
Showing all 13 results
-
Digital I/O104-DIO-48S Digital I/O Board w/CoS IRQ
Features
- 48 or 24 parallel lines of 82C55 digital I/O with tristate buffers prevent unintended control of external equipment
- IRQ on input change of state (COS) eliminates the need for constant polling
- High sink/source current 64mA/32mA
- I/O pulled up to 5V for contact monitoring
- Compatible with Opto-22 and other industry standard I/O racks
Factory Options: (call for pricing and availability)
- 82C54 with three 16-bit counter/timers for event counting, frequency output, pulse width and frequency measurement
- 0 to 70°C and -40 to +85°C versions available
- Economy version without COS feature
- Pull-down resistors on I/O lines
- RoHS Available. Please contact us for ordering information
(0 reviews)$164.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
ETH-DIO-48 Ethernet Digital I/O Module
SPECIFICATIONS
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 48 or 24 channel high-current TTL digital I/O lines
- Compatible with industry standard I/O racks such as Grayhill, Opto 22, Western Reserve Controls, etc.
- Eight-bit ports software selectable for inputs or outputs
- All 48 digital I/O lines buffered with 32 mA source / 64mA sink current capabilities
- Jumper selectable I/O pulled up to 5V (via 10KΩ) for contact monitoring, pulled down to ground or floating
- Supports configuration of power-on defaults I/O direction and output levels
- DHCP or static IP assignment
- 5VDC regulated external power supply included
- Resettable 0.5A fused +5VDC output per I/O connector
- Standard 50-pin IDC-type shrouded connectors with key
- Small, (4″x4″x1.7″) rugged, steel industrial enclosure
- Designed, made, supported, and manufactured in the USA
Factory Options
- Low-voltage (LVTTL) for 3.3V applications
- Industrial operating temperature (-40°C to +80°C)
- OEM version (board only), features PC/104 size and mounting compatibility
- Order with our IOB-48 for 48 channels of output isolation
- DIN rail mounting provision
- RoHS available, please contact us for ordering information
(0 reviews)$179.00 – $719.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
ETH-IDIO-16 Ethernet Isolated Input, Solid State Relay Output Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 fully protected and isolated High-Side FET 2A outputs
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″ x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and solid-state output-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN Rail mounting provision
(0 reviews)Call – $379.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
ETH-IIRO-16 Ethernet Isolated Input, Form C Relay Family
Features
- Ethernet 10/100 RJ45 connector for interfacing to CPU or network
- 16 optically isolated inputs (3V to 31V)
- 16 Form C electro-mechanical relays switch 1A
- DHCP or static IP assignment
- Internal, removable terminal board for easy wiring
- PC/104 module size and mounting compatibility
- Small (4″ x 4″x 1.7″) rugged industrial enclosure
- DC Jack and screw terminals for required external power
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Eight- and four- input/output versions
- Input-only and relay-only versions
- Economy “E” version without the screw terminal board
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- Extended operating temperature (-40°C to +80°C)
- Wide input (7VDC to 30VDC) external power
- RoHS available
- DIN rail mounting provision
(0 reviews)$229.00 – $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
mPCIe-DIO-24X
FEATURES
-
- With Digital Integration Features!
- Outputs with pulse/train / PWM / frequency generation, Inputs with digital filtering and flexible measurement of pulse duration, frequency, and event counting, IRQ generation and more.
- PCI Express Mini Card (mPCIe) Type F1, with latching I/O connectors
- 24 high-current LVTTL DIO lines (24ma source/sink)
- Change-of-State (COS) detection IRQ generation
- 10k ohm pull-up resistors
- Four and eight bit ports independently software selectable for use as inputs or outputs
- All signals brought out to optional panel-mountable 37-pin male D-Sub connector
- RoHS standard
- Available Now in M.2 form!
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Industrial operating temperature (-40°C to +85°C)
- TTL signaling with user supplied VCCIO (5V)
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$333.00 – $385.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
-
USB
USBP-DIO16RO8 USB, Pico-I/O™ Sized Digital I/O and Relay Board Family
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 16-channel TTL/LVTTL digital I/O
- All 16 I/O lines buffered with 32mA sink/source current capabilities
- 8 Form C electromechanical relays switch 1A
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Pico-I/O™ module size (60mm x 72mm) & mounting capability
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended temperature (-40°C to +85°C) operation
(0 reviews)$139.00 – $239.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-16H: 16-bit Family of Digital Waveform I/O USB Modules
FEATURES
- High-speed USB 2.0 device
- 16 high-speed digital I/O lines feature continuous, sustained throughput up to 16 MB/s
- Capable of 80 MB/s bursts with flexible synchronous clock and handshaking capabilities
- Continuous streaming over USB with no maximum waveform length
- On-board embedded FIFO memory up to 128 kByte
- 18 additional digital I/O lines arranged in 4 programmable groups
- All outputs buffered with 24 mA sink/source capabilities
- Type B USB connector features high-retention design
- Standard 68-pin SCSI high density latching connector
- Custom high-speed function driver
- Alternate embedded USB connector
- All required power drawn from USB port, no external power adapter required
- Small, (4″ x 4″ x 1.25″) rugged industrial enclosure
- PC/104 module size and mounting compatibility
- Industrial strength and high-retention Type B USB connector
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
Configurable power-on defaults
Digital input debouncing and latching
Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- LVTTL for 3.3V applications
- Input only, output only, and input/output versions
- OEM version (board only) features PC/104 module size and mounting compatibility
- External power for high current capabilities
- Extended temperature and DIN rail mounting provisions
- RoHS available, please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$379.00 – $859.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-32: 32-Bit Digital Input/Output USB Module
FEATURES
- Small (3.5 by 3.7 in.), portable, 32-channel Digital I/O USB module
- Four 8-bit ports independently selectable for inputs or outputs
- High-Speed USB 2.0 device, USB 3.0 compatible
- All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
- Standard 50-pin IDC connector with key
- Removable screw terminal adapter for easy wiring
- USB/104 form-factor for OEM embedded applications
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small (4″ x 4″ x1.25″) rugged industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Three 82C54 counter/timers
- Extended operating temperature (-40° to +85°C)
- External power components and AC/DC adapter
- Screw terminals for power input provide high retention connection
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- 24-channel version compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$194.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO-32I: USB 32-Bit Independently Selectable Digital I/O Module
Features
- Small (3.5 by 3.7 in.), portable, 32-channel USB digital I/O module
- 32-bits independently selectable for inputs or outputs
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
- Standard 50-pin IDC connector with key
- Removable screw terminal adaptor for easy wiring
- USB/104 form-factor for OEM embedded applications
- OEM version (board only) features PC/104 module size and mounting compatibility
- Alternate micro-fit embedded USB header connector
- Custom high-speed function driver (non-HID)
- Type B USB connector features industrial strength and high-retention design
- Small (4″ x 4″ x1.25″) rugged industrial enclosure
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Support for Wind River VxWorks (call for ordering information)
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- Extended operating temperature (-40° to +85°C)
- External power components and AC/DC adapter
- Screw terminals for power input provide high retention connection
- OEM (board only) version with PC/104 mounting holes and PCB footprint for added flexibility in embedded applications
- 24-channel version compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls
- RoHS Available. Please contact us for ordering information
(0 reviews)$229.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
USB-DIO-48: 48-Channel Digital Input/Output USB Module
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 48 lines of digital I/O
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Six (6) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Drivers and sample application provided
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- PC/104 size (3.550 by 3.775 in.)
- Rugged industrial enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
Factory Options
- Board only version with no enclosure
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C)
- DIN rail mounting provision
- Screw terminals for power input provide high retention connection
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$229.00 – $718.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
USB-DIO-96: 96-Channel Digital Input/Output Module on USB
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 96 lines of digital I/O
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Twelve (12) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Drivers and sample application provided
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- PC/104 size (3.550 by 3.775 in.)
- Rugged industrial enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- LabView VI driver
- Designed, made, supported, and manufactured in the USA
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer
- Configurable power-on defaults
- Digital input debouncing and latching
- Digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- Board only version with no enclosure (-OEM)
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C, -T)
- DIN rail mounting provision
- Screw terminals for power input provide high retention connection
- RoHS-compliant version.
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$329.00 – $999.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
USB
USB-DIO24-CTR6: 24-Channel, USB Digital Input/Output Module with 6 Counter/Timers
FEATURES
- 24 channel USB digital I/O module
- High-Speed USB 2.0 device, USB 3.0 compatible
- Two 8-bit & two 4-bit ports each software configurable for input or output
- Field selectable CMOS (+5V) or LVTTL (3.3V) VCCIO signal levels
- CMOS: All 24 I/O lines buffered with 32 mA sink and source
- LVTTL: All 24 I/O lines buffered with 24 mA sink and source
- Two 82C54 counters with all pins available at I/O connector
- Type B USB connector features industrial strength and high-retention design
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- VCCIO at connector for general purpose use, protected by polyfuse
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC header connector with key
- Alternate micro-fit embedded USB header connector
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- USB/104 form-factor for OEM embedded applications
- Small, board itself is PC/104 size (3.550″x3.775″)
- Custom high-speed function driver (non-HID)
- Rugged, steel, industrial enclosure measures just 4″x4″x1.25″
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
FACTORY OPTIONS
- External power for higher source current capabilities
- Screw terminals for power input provide high retention connection
- OEM (board only) version for embedded applications
- Industrial operating temperature (-40°C to +85°C)
- RoHS Available. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$129.00 – $224.00 Add To Quote This product has multiple variants. The options may be chosen on the product page -
Digital I/O
USB-DIO48DO24 Digital I/O and FET Board
Features
- High-speed USB 2.0 device, USB 3.0 and 1.1 compatible
- 48 lines of digital I/O
- 24 fully protected and isolated FET 2A outputs
- High retention type B USB connector
- Mini USB header connector in parallel with type B for stacking and embedded applications
- Six (6) 8-bit ports independently selectable for inputs or outputs
- All I/O lines buffered with 32 mA source, 64mA sink current capabilities
- I/O Buffers can be enabled or tri-stated under program control
- Jumper selectable I/O pulled up to 5V for contact monitoring, pulled down to ground or floating in 8-bit groups
- Jumper selectable power provided via USB cable or external power supply for higher source current capabilities
- Resettable fused +5VDC outputs per 50-pin connector
- Standard 50-pin IDC-type shrouded connectors with key
- Removable internal terminal board for ease of wiring
- PC/104 module size and mounting compatibility (3.550″ by 3.775″)
- Rugged, industrial, steel enclosure
- Compatible with industry standard I/O racks like Grayhill, Opto 22, Western Reserve Controls, etc.
- Labview VI driver
-
- Now with Firmware 2.0 features!
- Onboard Watchdog Timer, configurable power-on defaults, digital input debouncing and latching, digital output Pulse Width Modulation (PWM) and Matrix Mapping
- Designed, made, supported, and manufactured in the USA
FACTORY OPTIONS
- 24 I/O, 12 FET output version
- 24 FET output only version
- OEM (board only) version for embeddeed applications
- External power components and regulated AC/DC adapter
- Extended operating temperature (-40° to +85°C)
- Screw terminals for power input provide high retention connection
- RoHS Compliant version. Please contact us for ordering information
- Support for Wind River VxWorks (call for ordering information)
(0 reviews)$274.00 – $399.00 Add To Quote This product has multiple variants. The options may be chosen on the product page
